Products center

FHM3 homogenizer mixing pump is an extension of the FHM1 type. The working chamber is composed of a total of 12 layers of three-stage rotor and stator. Proceed products are dispersed, refined and emulsified by the rotor and stator in stages. FHM3 series is an high-efficiency ultra-fine homogeneous pump with mixing, dispersion, breaking, dissolution, refinery, homogenization, emulsifying and transporting. The sealing of FHM3 series can be either double-face or single-face according to the properties of the processed materials. It also can have heating insulation or cooling device if required by the users.

The pump cavity of FHM1 series homogenizer mixing pump is equipped with a set of double-layer stator and double-layer rotor. The rotor transmission shaft is made of high-strength 316 material, and the sealing device is a water-cooled double face mechanical seal. The pump shaft is supported by a bearing box and is connected to the motor through a coupling. The working principle of the pump is to suck the material from the inlet, and then discharge it from the outlet after homogenizing and emulsifying.